Jensen sits on the Green River at about 4,760 feet, and the weather here runs to extremes. July afternoons push into the low 90s, then January nights drop to around 3 degrees. Concrete expands and shrinks with every swing, and any water sitting in a crack turns into ice that pries it wider.
That’s why so many Jensen driveways, porches, and farm slabs show cracks and rough patches after a few seasons. The fix usually isn’t a tear out. Patching damaged spots, filling cracks, and sealing the surface keeps water from getting in, and a coating or polish can turn a dusty shop floor into one you can actually keep clean.
Crack, chip, and spall repair for Jensen driveways, porches, steps, and farm slabs before the next freeze opens them up.
Sealing that keeps snowmelt and ice melt from soaking into Jensen concrete during those cold January stretches.
Ground and polished floors for Jensen shops, garages, and work spaces that need a hard, dust free surface.
Breakout and haul off for Jensen concrete that has heaved, crumbled, or turned into a trip hazard.
Epoxy coatings for Jensen garages and equipment bays that take a beating from tractors, trucks, and fluids.
Stains that give tired Jensen patios, walkways, and floors a warmer, richer color without replacing them.
Most Jensen driveways and patios do well with a fresh coat of sealer every two to three years. Late summer, once the hottest days pass, is a good window because the slab is dry and there’s time to cure before snow.
Watch high traffic spots like the back step and the shop apron. If water darkens those areas instead of beading up, don’t wait for the full cycle.
Before anyone talks about breaking out a Jensen slab, we look hard at whether a repair and sealer will do the job.
Our sealers, patch materials, and coatings are picked for a climate that runs from scorching summers to subzero nights.
Cleaning, grinding, and patching come before any finish goes down, since a coating only holds as well as the surface under it.
Dust gets contained, debris gets hauled, and your Jensen yard looks as tidy when we leave as when we showed up.
We come out to your Jensen property, look at the cracks, flaking, and drainage, and lay out your options with a straight quote.
Loose material gets chipped out, the surface gets cleaned and ground, and cracks get filled so the finish has something solid to grab.
The patch, sealer, epoxy, or stain goes on when temperature and moisture are right, at the thickness the product calls for.
We look over the finished Jensen job together and explain how long to stay off it and how to keep it in shape.
