A plain concrete floor in a garage or shop takes a lot of abuse. Salty slush drips off trucks all winter, oil and coolant soak into the surface, and the concrete itself sheds a fine dust that ends up on everything. Over time the floor looks tired no matter how often you sweep it.
Epoxy coating fixes that by bonding a tough layer to the slab. Here in Jensen, we start with diamond grinding to open up the concrete, repair cracks and pits, and then apply the coating system that fits your space, from a simple solid color to a decorative flake floor with a clear topcoat. The result is a floor that sheds spills, brightens the room, and cleans up with a squeegee and a mop.
We know how Jensen winters, road salt, and farm work wear on garage and shop floors, and we pick coatings that suit those conditions.
Diamond grinders with dust extraction, moisture meters, and the proper rollers and squeegees help us lay down an even, well bonded coating.
If your slab has moisture problems or would do better with polishing, we'll tell you before you invest in an epoxy floor.
We keep grinding dust contained, protect walls and stored items, and leave your garage or shop swept and ready once the coating cures.
Epoxy is a two part coating that hardens into a thick, durable layer once it’s mixed and spread. Bonded to properly prepared concrete, it closes off the pores so oil, coolant, salt, and water stay on top where you can wipe them up. It also stops the slab from dusting, and the brighter surface bounces light around the room.
For a Jensen garage, that means winter slush carried in off US-40 sits on the floor until it dries or gets squeegeed out the door, instead of soaking in and eating at the concrete. It also means a cleaner place to park, tinker on projects, and store gear.
Prep decides whether an epoxy floor lasts for years or starts peeling in a few months. Some quick jobs rely on acid etching, which can leave residue behind and an uneven surface. We use diamond grinding instead. It strips the weak top layer, old sealers, and contamination, and leaves an even texture the coating can grip.
Once the floor is ground, we fill cracks, pits, and spalled spots so the coating goes down smooth. If the slab has bigger damage, like broken sections or settling, we’ll recommend concrete repair before coating so you aren’t sealing problems in. We also test for moisture, since water vapor rising through the slab can push a coating loose.
Epoxy floors aren’t one size fits all. These are the options most people weigh when they plan a floor:
We’ll talk through how you use the space and bring samples, so you end up with a floor that fits the work you actually do in it.
Jensen is farm and ranch country, and plenty of shop floors here see more than a car and a lawn mower. Tractors, side by sides, welders, and stored fertilizer or chemicals all put extra demands on concrete. Epoxy gives those floors a surface that resists stains and is easy to hose or mop clean after a messy repair.
For working shops, we usually suggest a heavier build and a grit additive in high traffic lanes, since a glossy finish can get slick with oil or water on it. Heavy steel equipment can still gouge any coating if it’s dragged, so we’ll be straight about where epoxy makes sense and where it doesn’t.
Epoxy isn’t the only answer for an indoor slab. Polishing grinds and hardens the concrete itself, with nothing on top to peel or chip. For a showroom, an office, or a space with forklifts or steel tracks, concrete polishing can be the smarter choice.
Epoxy wins when spills and chemical resistance matter most, or when you want color and flake. Many shops split the difference, with a coated service bay and a polished front area. We’ll look at the space with you and lay out what each finish does well.
Epoxy cures by chemical reaction, and temperature controls how well that reaction goes. January lows near 3°F mean an unheated garage is too cold for most coatings in midwinter. If your building has heat, we can often work year round, but we’ll check the slab temperature with a thermometer before we start.
Summer has the opposite problem. With July highs near 92°F, a hot garage can shorten the working time, so we plan for cooler morning hours. While we’re there, take a look at the apron outside the garage door. That slab takes the worst of the slush and salt, and concrete sealing helps protect it through the winter.
We check slab condition, moisture, and temperature, look at old coatings or stains, and talk about how you use the space.
Your free quote spells out grinding, repairs, the coating system and finish you picked, and how long the floor needs to cure.
We grind, repair, prime, and apply the base, flake, and topcoat layers, keeping the space closed off while each one cures.
We walk the finished floor with you, explain when you can walk and park on it, and share simple cleaning tips.
