Most concrete around a home is functional, gray, and pretty forgettable. A stain changes that by soaking color into the surface, so it won’t peel the way paint does. You can go subtle with earth tones or bolder with deeper browns and reds, and the slab keeps its natural texture and mottling.
We handle concrete staining in Jensen from start to finish. That means a deep clean, crack repair, stain application, and a protective sealer to lock in the color against strong sun and winter weather. We’ll help you choose colors that match your house and yard, and we’ll give you an honest idea of how the finished slab will look, since every piece of concrete takes stain a little differently.
We know how Jensen sun, dust, and winter weather affect color, so we recommend stains and sealers that hold up out here.
Grinders, sprayers, brushes, and masking supplies let us strip old coatings, apply stain evenly, and seal it with the right coverage.
We test colors on your actual concrete and tell you plainly how the finished slab will look, mottling and all.
We mask walls, plants, and doors before any stain goes down, then collect rinse water and leave the area tidy.
Jensen has been a river town from the start. It was settled in 1877 and named for Lars Jensen, who ran a ferry on the Green River, and it went by Incline and Riverdale before that. Today it’s the Utah gateway to Dinosaur National Monument, ringed by farm ground and open high desert. That setting gives you a great palette to pull stain colors from.
Colors that tend to look right here include:
Paint and solid coatings sit on top of concrete like a skin. They look sharp at first, but with Jensen’s freeze and thaw and strong summer sun, they tend to peel, flake, and wear through in traffic lanes. Then you’re scraping and repainting every few years.
Stain works differently. It soaks into the surface and colors the concrete itself, so there’s no film to lift. The look is more natural, with variation and depth instead of a flat, uniform color. A sealer on top protects that color, and when the sealer wears, you reseal rather than redo the whole floor.
Reactive stains, sometimes called acid stains, contain metallic salts that react with the lime in concrete. The result is a mottled, variegated look, a bit like stone or leather, in a limited range of earthy colors. Because the reaction depends on the concrete, no two slabs come out exactly alike, and that’s a big part of the appeal.
Water-based stains don’t react chemically. They soak into the pores and offer a much wider color range, including brighter or more uniform tones. They’re also easier to control and a good pick on older concrete that may not react strongly. We’ll test both on a hidden spot of your slab so you can see real results before we commit.
Stain only soaks into clean, open concrete. Sealers, paint, curing compounds, oil, and even heavy dirt block it and leave blotchy spots. We start with a deep clean and, where needed, light grinding to strip old coatings. Then we tape and mask walls, doors, and planting beds, since stain will color anything porous it touches.
Cracks and chips need attention too. Stain doesn’t hide damage, and it can actually draw attention to patches because repair material takes color differently. If your slab has more than minor damage, concrete repair before staining gives you a smoother, more even result.
Color works indoors, too. Basement floors, mudrooms, and the office corner of a farm shop are great candidates, especially where carpet or tile would struggle with moisture, boots, and dirt. A stained and sealed floor is easy to sweep and mop, and it can pass for finished stone at a fraction of the effort.
Indoor stain can also be paired with grinding and polishing. If you’d like a harder, glossier surface that shows off the color, concrete polishing with a dye or stain step is worth a look for living spaces and storefronts.
At about 4,760 feet, Jensen sees intense sun, and UV light fades color over time, especially on south and west facing patios. Winter adds snow, slush, and de-icer. A good sealer over the stain is the best defense against both.
We finish every outdoor job with a sealer suited to the area, and we can add grit on steps and walkways for better footing. Depending on traffic and exposure, the sealer will need a fresh coat from time to time. Our concrete sealing service can handle that upkeep so the color stays rich. Between coats, sweep often and use mild cleaners instead of harsh chemicals.
We look at the slab's condition, check for old sealers and stains, and test a few colors on a hidden spot.
Your free quote lists prep work, repairs, stain type, color choices, and the sealer we recommend for that space.
We clean, mask, repair, and apply the stain in even layers, then neutralize, rinse, and seal the surface.
We review the finished color with you, explain how long the sealer needs to cure, and go over simple upkeep.
