A sign does its job only when it is standing straight and easy to read. In Jensen, most business traffic comes off US-40 or heads up SR-149 toward the monument, so drivers get a few seconds to spot you. A sign that leans, has a cracked face, or is half hidden behind brush might as well not be there.
Our signage installation and repair service in Jensen covers business signs, farm and ranch entry signs, address markers, and wayfinding signs for lots and campgrounds. We do not fabricate signs. You work with your sign maker on the design, and we set posts, build mounts, hang panels, and repair or reset signs that have taken a beating from weather or vehicles.
We know how traffic moves through Jensen along US-40 and SR-149, which helps us place signs where drivers can actually read them.
Augers, lifts, and anchoring tools let us set freestanding posts, hang wall signs, and swap heavy panels without extra crews.
If a leaning sign only needs a reset and new brackets, we tell you that before anyone talks about replacing the whole thing.
Dirt from post holes, old hardware, and packing material get cleaned up so the area around your new sign looks finished.
Jensen is the Utah gateway to Dinosaur National Monument. SR-149 runs about 4.2 miles from US-40 to the Quarry entrance, and in the busy months a steady stream of visitors rolls through town looking for gas, food, a place to stay, or a campsite. Most of them have never been here before. A sign that is clear, well placed, and easy to read from the road can turn a passing car into a customer.
We install business signs, monument signs, entry signs, directional signs, and address markers for shops, rentals, farms, and campgrounds in and around Jensen.
We want to be clear about our part. Basin does not design or fabricate signs. You work with a sign company on the artwork, materials, and lighting. Once the sign is built, we take over the installation: posts, footings, mounting hardware, and the physical work of getting it in the air, level, and secure.
It helps to loop us in early. If we know the sign size, weight, and mounting style before it is built, we can plan the posts and hardware so everything lines up on install day.
A freestanding sign is basically a sail on a stick. Wind pushes on the flat face, and the post has to resist that force at ground level. Posts that are too small or too shallow lean after one windy spring. Uintah County footings go at least 30 inches below grade, and signs often call for more depending on size.
Before we dig, we call Utah Blue Stakes, at least three business days ahead. Signs near the road frequently sit close to buried power, phone, and water lines, so a locate is a must. If the sign will be lit and needs power run to it, our trenching for sign power lines can dig and backfill the path, and your electrician installs the line.
Signs take a lot of punishment between hot summers, cold winters, and vehicles in tight lots. These are the signage repair jobs we see most:
Many of these are a reset or a hardware swap. If a face needs replacing, your sign maker makes the new panel and we install it. Sometimes a faded sign is just a dirty one, though. Dust, road film, and bird mess dull the colors, and pressure washing for sign faces and posts can bring them back with the right pressure for the material.
On the rural lanes around Jensen, homes and farms can be hard to find, especially for delivery drivers or emergency crews at night. A clear address sign at the end of the drive is simple and worth it. Ranch entry signs, often hung from a crossbar between two tall posts, need extra depth and bracing because the span catches a lot of wind. We set those posts deep and square so the crossbar stays level. A gate sign or brand sign on the crossbar should be fastened through the frame, not just hung on hooks that wear through and drop the sign in a storm.
Once a sign is up, a little upkeep goes a long way. Check the bolts and brackets each spring, since a winter of wind can work them loose. Brush and weeds that grow up in front of a low sign hide it from drivers, so keep the base trimmed. Kochia and cheatgrass shoot up fast along road edges in early summer, and a monument sign can disappear behind them by July.
After dark, an unlit sign disappears. Our permanent property lighting can wash a sign with light so travelers can spot you after sunset. Call (801) 669-0512 to plan your install.
We look at sight lines from the road, check for buried lines, and review the sign size, weight, and mounting plan.
You get a free quote covering posts, footings, hardware, and labor, with any coordination needed with your sign maker.
We call Blue Stakes, set posts at the right depth, mount the sign level, and tighten every fastener.
We look at the finished sign from the road with you, check it is plumb and secure, and clean up the site.
