Dust settles on everything in a dry farming town. Around Jensen, it blows in off fields and gravel lanes, mixes with spring mud and winter road grime, and turns into a dull film on siding, walks, and storefront windows. Wood fences and decks gray out, and concrete picks up stains from vehicles and equipment.
Our pressure washing service in Jensen covers homes, rentals, shops, and businesses that greet monument visitors. We wash concrete drives and walks, siding, decks, fences, patios, entries, and dumpster pads, adjusting pressure, tips, and distance for each surface. A clean surface also shows cracks and wear that dirt hides, so we will point out anything worth fixing before it gets worse. Most jobs leave a property looking years younger.
We know how Jensen dust, dry air, and summer heat affect a wash, and we time each job so cleaners work and surfaces dry evenly.
Surface cleaners, adjustable tips, and pretreatment sprayers let us handle concrete, siding, wood, and masonry on the same visit.
If a surface is too fragile for pressure or a stain will not lift, we tell you up front instead of risking damage.
We rinse debris off walks and beds, put furniture back where it was, and leave the property cleaner than the surfaces alone.
Jensen gets roughly 8.3 inches of precipitation a year, so rain rarely does much cleaning. Instead, dust from fields and dirt roads settles on every flat surface and sticks to anything a little damp. Add spring mud, sprinkler overspray, bird droppings, oil from trucks and equipment, and the sand and grime that tracks in all winter, and surfaces get dingy fast.
Pressure washing strips that buildup off concrete, siding, wood, and masonry. We work on homes, rentals, shops, and the businesses along US-40 and SR-149 that want to look sharp for travelers headed to the monument.
Business owners usually care most about the entry. Gum on the walk, salt rings by the door, drink spills, and tire marks around the gas pumps or parking spaces all make a place look tired before anyone steps inside. A wash clears that first impression. For paved lots and drives, it is also the prep work that needs to happen before asphalt sealcoating for lots and driveways, since a coating will not bond to dust and oil.
Concrete can take higher pressure, and a rotary surface cleaner keeps the spray even so the slab does not end up striped. Wood is a different story. Too much pressure or too close a nozzle raises the grain and leaves gouges, so decks and fences get lower pressure and a wider fan. Vinyl and painted siding need a gentle wash from the right angle so water stays out from behind the panels. Older brick and mortar need a light touch too, or joints can wash out.
That means a single property might get three or four different setups in one visit, and that is how it should be.
July highs in Jensen run around 92 degrees, and that heat changes how a wash goes. Cleaners can dry on a hot surface before they do their work, leaving streaks, so we often start early in the day or work in the shade. The upside is that surfaces dry fast in the dry air, which makes summer and early fall a good window for washing before a sealer or stain goes on.
Winter is mostly off the table. Water left on a walk during a cold snap turns into a sheet of ice, so we schedule washes once nights stay above freezing.
A little prep makes the job faster and protects your belongings. Before we arrive:
Red Fleet Reservoir supplies Jensen water, and we try to be sensible with it, using surface cleaners and pretreatments that cut down on rinse time.
Sealers, stains, and coatings need a clean, dry surface to bond. Washing first removes dust, oil, and loose material so the product soaks in instead of sitting on top of the grime. On concrete drives and patios, a good wash is the first step before concrete sealing for drives and patios. Wood decks and fences need the same treatment before a fresh coat of stain, and they need longer to dry out because wood holds moisture deeper than concrete. We time the wash so the surface has a full dry day before anything goes on.
Once the grime is gone, you can see the real condition of a surface. Hairline cracks and chipped edges show up on clean concrete. Gray, split boards stand out on a washed fence, and loose pickets are easy to spot. Mildew lines along the bottom of siding can point to a sprinkler head that needs to be turned away from the house. If we see boards or posts that need attention, fence repair after a wash is a natural next step before the next winter. Call (801) 669-0512 to get on the schedule.
We look at each surface, note stains, fragile areas, outlets, and fixtures, and check water access at your spigot.
You get a free quote listing each area to be washed and any pretreatment needed for oil, rust, or mildew.
We protect fixtures, pretreat stains, and wash each surface with the pressure and tip that suits that material.
We walk the clean surfaces with you, point out any cracks or wear we found, and make sure you are happy.
