Plain gray concrete does its job, but it rarely adds anything to a home. Staining changes that without covering the surface. The color soaks into the concrete and becomes part of it, so you keep the natural texture while trading gray for warm browns, soft tans, earthy reds, or cool charcoal.
In Roosevelt, staining works great on back patios, front porches, walkways, basements, and shop offices. We clean the slab down to bare concrete, repair chips where needed, test colors on a small area, then apply the stain and a protective sealer. That sealer is what keeps the color looking rich through strong sun, blowing dust, and snowmelt. It’s an easy way to make an older slab feel like part of the design instead of an afterthought.
We know how Roosevelt's intense sun, dry wind, and winter snowmelt affect color, and we help you pick shades that hold up.
Pressure washers, surface grinders, and proper sprayers let us clean the slab fully and apply stain evenly from edge to edge.
If your slab won't take stain well or another finish suits it better, we'll explain why before you spend a dime.
We mask walls, doors, and planters, contain rinse water, and leave your patio or floor clean and ready to enjoy.
Unlike paint, concrete stain doesn’t form a layer that can peel. It soaks into the top of the slab and colors the concrete itself. That’s why a stained patio still looks like concrete, with all its texture and small variations, just warmer and more finished.
Roosevelt has grown a lot since Ed Harmston laid out the townsite in 1906, so local homes have concrete of every age. Older slabs often have more character to work with, with patches, wear patterns, and tone variations that stain brings out. Younger slabs take color more evenly. Either way, we’ll show you how your concrete reacts before we commit to the whole surface.
Acid stains, also called reactive stains, work with the minerals in the concrete to create color. The result is mottled and natural, a lot like leather or weathered stone, and no two slabs come out the same. Colors lean toward earth tones like browns, tans, and rust.
Water-based stains settle into the pores without reacting, so the color is more predictable and the range is much wider. Grays, blacks, deep blues, and custom blends are all possible. Some projects use both types together, laying down a mottled base and accenting it with a water-based tone.
Color looks different outdoors in Roosevelt than it does on a sample card. At nearly 5,200 feet, UV is intense and will mute pale shades over time. Dark colors soak up heat, and a deep brown patio in July, when highs reach the low 90s, can get uncomfortable under bare feet.
Mid-tone browns, sandstone, and warm grays tend to look best here. They pair well with the high desert landscape and hide the fine dust that dry wind drops on outdoor surfaces. Indoors, you can go bolder, since basement and office floors don’t face sun or weather. We always test colors on a small spot so you see the real result first.
Stain only takes where the concrete is clean and open. We start by removing dirt, old sealer, paint drips, and anything else that would block it. For outdoor slabs, pressure washing is usually the first step, followed by spot treatment for oil or rust.
Once the surface is dry, we repair chips and cracks where it makes sense, then apply stain in one or more coats until the color develops. Acid stains are neutralized and rinsed afterward. Finally, we apply a sealer to lock in the color and protect it from water, salt, and wear.
Staining shines on surfaces that see foot traffic and weather: patios, porches, walkways, pool decks, basements, and offices. It can make a modest backyard slab look like a planned outdoor living space. A stained and sealed basement floor is also a smart way to finish a lower level without adding carpet that can trap moisture.
It’s not the best fit for floors that take constant tire traffic, oil, and road salt. Stain colors the surface but doesn’t add a thick protective layer. For garages and working shops, epoxy coating provides much better chemical and abrasion resistance, and we’ll help you decide which finish suits each space.
Stained concrete holds its color for years, but the sealer on top needs some attention, especially outdoors. A few simple habits go a long way:
Plan on regular concrete sealing every few years for outdoor slabs. Fresh sealer keeps the color rich and protects it from UV, snowmelt, and the dry wind that moves across the Basin.
We look at the slab's condition, past sealers, and sun exposure, and talk through the colors and look you have in mind.
You'll get a free quote outlining cleaning, repairs, stain type, number of coats, and the sealer we recommend.
We clean to bare concrete, test the color, apply stain in even coats, and seal it once everything dries.
We walk the finished surface with you, confirm the color, and explain drying time and how to keep it looking fresh.
