A demolition project isn’t done until the debris is gone. Piles of lumber, drywall, roofing, and concrete take up space, hide nails, and give the wind something to scatter. In a town where afternoon gusts are common, loose material doesn’t stay put for long, and the neighbors notice.
Our demolition debris removal in Rangely covers waste from full teardowns, interior gut jobs, garage and shed removals, fire or storm damage cleanup, and leftover piles from projects that stalled out. We bring the equipment to load it, separate metal and concrete from general waste, and haul everything off. Whether you’ve got a few loads or a full site, we’ll clear it out and leave the ground ready to work on, build on, or sell.
We know Rangely's wind, weeds, and winters, and we plan debris jobs so loose material doesn't end up across the neighborhood.
Loaders, excavators, and dump trucks handle heavy concrete, tangled framing, and mixed piles that a pickup or dumpster can't.
We'll tell you plainly what's in the pile, what it takes to haul it, and whether anything needs extra steps first.
After the last load leaves, we pick up nails, glass, and scraps so your property is clean and safe to walk.
Some of the debris we haul comes from our own teardowns. A lot of it doesn’t. Owners take down a shed themselves, a contractor guts a house and runs out of room in the dumpster, or a building partially collapses after years of neglect. Sometimes a project stalls and the pile sits for a season before anyone deals with it.
No matter how it got there, the goal is the same: get it loaded, get it gone, and leave the site usable. If the building is still standing and needs to come down first, structure demolition and debris removal can be handled together.
Leaving a pile on the property costs more than it seems. Dry wind picks up insulation, roofing paper, and plastic and sends it down the block. Weeds like kochia and cheatgrass move in fast around the edges. Nails and broken glass work their way into the dirt, and rodents find a home in the gaps. A pile that started as one weekend project can turn into a code complaint or an eyesore that drags down a sale, and it only gets harder to deal with the longer it sits.
Then there’s winter. Once snow covers a pile, it’s harder to load and harder to see what’s in it. Getting debris out while the ground is dry saves time on both ends. Spring melt can also turn the ground around a pile into mud, which makes it tougher to get loaders and trucks in without leaving deep ruts across the yard.
A few details help us give you an accurate number:
Photos sent ahead of time help, but we’ll still come look before we quote. Piles almost always hold more than they appear to from the street, and a few minutes on site lets us bring the right size equipment the first time.
Not all debris goes to the same place. Metal, concrete, and general construction waste are separated as we load, which keeps the hauling organized. Clean concrete and block can be handled differently than mixed waste, and scrap metal pulled out of the pile doesn’t need to ride along with drywall and shingles.
If the job turns up old slabs, patios, or driveways that need to be broken out, concrete and asphalt removal can be added so everything leaves in the same round of hauling.
Debris from older buildings can include materials that need special handling. In Colorado, asbestos inspection and notification requirements go through CDPHE, the state health department, and should be squared away before demolition. If you’re not sure what’s in an existing pile, let us know up front so we can figure out the right next step before we load anything. Guessing on that kind of material is never worth it, and we’d rather pause the job for a day than move something that should have been handled differently.
When the last load is gone, we make a pass for nails, glass, and small scrap so the ground is safe to walk and drive on. If the debris covered a large area or left ruts from heavy equipment, we can smooth it out.
For lots that also have brush, trash, or yard waste mixed in, debris hauling covers the non-demolition cleanup. One crew, one schedule, and a property that’s finally clear. If you’re planning to build or sell, that clean slate makes the next step a lot easier to plan.
We look over the pile, check what it's made of, and figure out the best access for loaders and trucks.
You get a written quote covering loading, sorting, hauling, and cleanup, so you know the full scope before we start.
We load the debris by machine, separate metal and concrete, secure light material from the wind, and haul it all away.
We walk the cleared site with you, finish the nail and glass pickup, and confirm nothing on the list was left behind.
