Signs do a lot of work. They help customers find you, tell drivers where to park, mark accessible spaces, and keep traffic moving safely. In Vernal, they also have to stand up to strong wind, heavy snow, plows, and years of high desert sun. Posts lean, panels crack and fade, and a sign that’s been hit by a truck or bent by the wind sends the wrong message about your business.
We install new signs and repair or replace damaged ones. That includes setting posts in solid footings, mounting signs on buildings, fences, and poles, replacing faded or broken panels, and straightening or resetting signs that have been knocked over. For parking lots, we install accessible parking, no parking, fire lane, and directional signs. If you need a lit sign, we’ll coordinate with your electrician.
We know how Basin wind, snow, and sun affect signs and set posts and mounts to hold up.
Post hole tools, ladders, lifts, and mounting hardware for signs of all sizes.
We'll help you place signs where they'll do the most good.
We remove old signs and debris and leave your property clean.
A sign has one job, which is to be seen, and it can’t do that lying in the gravel. Sign installation in the Ashley Valley is mostly about what you can’t see: how deep the post goes, what it’s set in, and how the sign is fastened to it. A flat panel catches wind the same way a privacy fence does, and on a gusty spring afternoon that’s a lot of force on one post. We set posts in solid footings sized for the sign, use hardware that won’t rust out in a few winters, and mount panels so they don’t twist or rattle loose.
We install and repair post signs, building and wall signs, HOA entrance signs, and parking and directional signs for businesses, churches, and property managers. We don’t make signs ourselves. You work with your sign maker on the design, and we handle getting it up and keeping it up.
Installation goes faster and cleaner when a few details are sorted out ahead of time. Here’s what helps us plan:
If the sign goes in the ground, we contact Blue Stakes at 811 at least three business days before digging. Utah requires it, the marking is free, and it keeps a post hole from finding a buried line.
A lot of local businesses sit on Main Street or Vernal Avenue, or out toward Naples, where drivers have a few seconds to spot you. Height, angle, and distance from the road all change how readable a sign is at speed. A sign set square to the street is easy to read head on and nearly invisible to approaching traffic, so we often angle post signs toward the main direction of travel. We also look at what blocks the view: trees that will leaf out in summer, parked trucks, and snowbanks that pile up in winter.
Parking lot signs have a rough life. Plows push snow right into them, oilfield trucks swing wide and clip them, and delivery drivers back into posts they can’t see. When we place accessible parking, fire lane, no parking, and directional signs, we look at where snow gets stacked and how big vehicles move through the lot. Sometimes moving a sign a few feet saves you from replacing it every spring.
Signs work best when the pavement backs them up. Fresh parking lot striping paired with clear signs gives drivers one consistent message about where to park and where to go.
High desert sun is tough on signs. Colors fade, plastic faces get brittle and crack in the cold, and paint on posts peels. Wind loosens fasteners until a panel starts to swing, and freeze and thaw cycles lift posts that weren’t set deep enough. Sign repair can mean straightening and resetting a post, swapping a cracked or faded panel for a new one from your sign maker, replacing rusted hardware, or removing an old sign and patching the wall or ground where it stood.
A bent, faded sign tells customers something about a business, so it’s worth fixing sooner than later. Before winter, marking low sign posts with tall stakes helps your snow removal crew see them under drifts and keeps them standing until spring.
Winter evenings get dark early, and a sign nobody can see after 5 p.m. is only doing half its job. If you want a lit sign, we install the sign and coordinate with your electrician, who handles the wiring and power. Lighting around the building helps too. Permanent property lighting on the roofline makes your storefront stand out from the road and makes the lot feel safer for customers and staff.
Whether it’s a new sign or one that took a hit, call us at (801) 669-0512 and we’ll get it standing straight.
We look at your property, talk about placement, and check the signs you have.
You get a written quote covering installation, repairs, materials, and timing.
We set posts, mount signs, and repair or replace damaged ones.
We walk the finished signs with you and make sure they're straight and secure.
