Neola only sees about 9 inches of precipitation a year, so dust settles and stays. Add mud tracked in from fields and lease roads, grease on shop floors, and salt film left behind by winter, and most surfaces here could use a good wash at least once a year, and some need it twice.
Our pressure washing service covers concrete drives and pads, shop floors and aprons, siding on homes and outbuildings, walks, steps, and storefronts. We pick pressure, nozzle, and water temperature based on what we’re cleaning, since concrete can take far more than painted wood or vinyl. The goal is a surface that’s clean and ready for whatever comes next, whether that’s sealing, staining, or just looking good for visitors.
We know Neola dust, lease road mud, and winter salt, and we plan each wash around what's actually built up on your surfaces.
Hot water units, surface cleaners, and adjustable nozzles let us wash concrete hard and siding gently on the same visit.
If a surface is too worn or fragile for pressure washing, we'll tell you and suggest a gentler way to clean it.
We rinse away loosened mud and debris, clear clogged drains, and leave walks and pads clean when we pack up.
On a working farm in Neola, the shop floor and equipment pad see more traffic than any room in the house. Tractors, balers, and pickups bring in mud from the field, drip oil and hydraulic fluid, and leave tracks that bake on in the summer heat. Over time that buildup makes concrete slick and hides cracks you’d want to catch early.
We use higher pressure and hot water on these surfaces when it makes sense, along with a degreaser on stubborn spots. A clean shop floor is safer to walk on and makes it easier to spot new leaks from equipment before they turn into bigger repairs. Some owners follow a deep clean with epoxy coating for Neola shop floors, which makes future spills much easier to wipe up.
With only about 9 inches of precipitation a year, Neola doesn’t get many good rinsing rains. Dust from fields and gravel roads settles on siding, soffits, and window frames and just sits there. On light colored homes it shows up as a dull, gray film. On outbuildings it mixes with spider webs and bird droppings.
Siding needs a gentler approach than concrete. We use lower pressure, a wider spray pattern, and a mild cleaner, then rinse from the top down. Too much pressure can force water behind lap siding, lift paint, or crack vinyl, so we keep the wand moving and the tip at a safe distance.
Every surface has its limits, and getting it wrong can leave marks that won’t come out. Here’s how we generally approach the common ones:
When we’re not sure how a surface will react, we test a small, out of sight spot first.
Oil and gas development is part of life around Neola, and the mud from lease roads is its own kind of mess. It’s heavy, sticky, and often mixed with oil or drilling residue. Pickups and service trucks carry it onto driveways, shop aprons, and parking areas, where it dries into a crust.
We soak and loosen that crust before washing it off, then treat any oil stains it leaves behind. Fresh drips come up much easier than old ones, so a regular wash on a busy shop apron keeps stains from setting. On asphalt parking areas, a clean surface also helps sealcoat bond, and our asphalt sealcoating in Neola works best on pavement that’s been washed first.
Sealers and stains only stick to clean concrete. Dust, oil, and old salt film all keep a coating from bonding, which leads to peeling and blotchy color. That’s why pressure washing is almost always the first step before we seal or stain.
After washing, the slab needs to dry fully before anything goes on top. In the dry Neola air that usually doesn’t take long in summer. Once it’s dry, concrete sealing helps keep water and ice melt from soaking in, and staining can bring back color on a slab that looks tired.
Neola winters get cold, with January lows around 9 degrees, so pressure washing outdoors only makes sense once nights stay above freezing. Water left in cracks or on steps can freeze into a slick sheet overnight. Late spring is a popular time to wash away winter salt and road spray, and early fall is a good time to clean surfaces before sealing them for winter.
Summer works too, with July highs near 93 degrees, though we’ll often start early in the day so cleaners don’t dry on the surface before rinsing. Call (801) 669-0512 and we’ll take a look and set up a time that works for your property.
We look at each surface, note stains and buildup, and check drains, outlets, and plants that need protecting during the wash.
Your free quote lists the surfaces we'll wash, the methods we'll use for each, and any stain treatment needed.
We pretreat oil and mud, wash each surface at the right pressure, and rinse from the top down to avoid streaking.
We walk the cleaned areas with you, point out cracks or wear the wash revealed, and confirm everything looks right.
