Garages and shops around Maeser see a lot. Trucks roll in covered in road salt and slush, tractors and side by sides drip fluids, and boots track in mud from the pasture. Bare concrete soaks all of that up, which leads to stains, dusting, and flaking over time. Scrubbing helps for a while, but it never really gets ahead of it.
An epoxy coating puts a hard, sealed layer on top of your existing slab. We start by diamond grinding the surface with dust control so the coating can grip, fill cracks and pits, then apply the epoxy system you choose, from solid colors to decorative flake with anti-slip texture. The result is a Maeser garage floor that’s easy to clean and looks sharp for years.
We know Maeser garages and shops deal with salty slush, pasture mud, and freezing winters, and we choose epoxy systems that handle all three.
Diamond grinders with dust extraction give the coating a proper profile to bond to while keeping dust out of your home.
If moisture or slab damage would cause the coating to fail, we'll tell you before you spend a dime on epoxy.
We contain grinding dust, protect walls and doors, and leave your garage clean and ready once the coating cures.
Winter is hard on garage floors around Maeser. Trucks pull in covered in slush from county roads, and that slush is loaded with salt and grit. It melts on the floor, soaks into the concrete, and dries into white rings that slowly eat at the surface. Summer brings dust, mud from the pasture, and drips from mowers, ATVs, and farm equipment.
Bare concrete absorbs all of it. Over a few years, you end up with oil stains that won’t scrub out, a dusty surface that tracks into the house, and flaking near the door. An epoxy coating seals the slab so spills sit on top and wipe off.
When an epoxy floor peels, bad prep is almost always to blame. Concrete has a smooth, weak top layer, and many garages also have old sealers, paint, or oil soaked into the surface. Epoxy can’t bond to that, so we diamond grind the entire floor to open up the pores and give the coating a clean, rough profile to grab.
Our grinders run with dust extraction vacuums, so most of the dust gets pulled off the floor instead of drifting through the garage and into the house. Grinding also exposes hidden cracks and pits. We fill those before coating, and if the slab has bigger problems, concrete repair comes first.
Epoxy systems come in a few main styles, and the right one depends on how you use the space and how much dirt you want to hide:
For a garage that sees snowmelt and pasture mud, full flake with a light anti-slip texture is a practical choice.
Epoxy is temperature sensitive. It needs the slab and the air to stay within a certain range for the coating to flow out and cure right. Maeser sits a little higher than town at around 5,600 feet, and winter lows often drop to around 10 degrees, so unheated garages and shops are tough to coat in the coldest months.
Late spring through early fall is the easiest window. Heated shops can sometimes be coated in winter if the slab stays warm enough. After application, you’ll need to stay off the floor for a set time before walking on it, and longer before parking vehicles. We’ll give you the exact schedule for your system.
Plenty of Maeser properties have detached shops, horse barns with tack rooms, and hobby farm workspaces. Epoxy fits spaces where you work on vehicles, use chemicals, or need a floor that’s easy to hose down. It stands up well to oil, fuel, and fertilizer spills that would stain bare concrete.
For lighter use, like a workshop, home gym, or storage room, concrete polishing can be a good alternative with nothing on top to chip or peel. We’ll talk through how you use the building and recommend the floor that makes sense.
Epoxy floors are easy to keep up. Sweep or dust mop to pick up grit, and wash with mild soap and water when needed. Avoid dragging sharp metal or heavy equipment stands directly across the surface, and use mats under jack stands or kickstands.
Don’t forget the concrete right outside the door. The driveway apron takes the same slush and salt, plus freeze and thaw cycles, without the protection of a coating. Concrete sealing on the apron helps it hold up while the garage floor inside stays protected.
We check your Maeser garage or shop slab for moisture, cracks, old coatings, and oil to see if epoxy is a good fit.
Your free quote outlines grinding, repairs, the epoxy system and finish you picked, and how long the space will be down.
We diamond grind with dust control, repair cracks, then apply primer, color or flake, and a tough clear topcoat.
We walk the finished floor with you, go over cure times before parking, and share easy care tips for winter.
