Out on rural Lapoint lanes, a clear sign can be the difference between a delivery driver finding you or turning around and heading back. Farm entries, home addresses, and small businesses along SR-121 all depend on signs that are readable from the road and still standing after a windy spring. With only about 170 people in town, most visitors are relying on that sign, not local knowledge, to find the right turn.
We don’t fabricate signs. Your sign maker handles the design and build, and we take it from there. We set posts at the right depth, mount panels and cabinets securely, and line everything up level. On existing signs, we straighten leaning posts, replace broken brackets, remount loose panels, and swap out damaged posts so your sign looks sharp again.
We know how wind and frost work on posts around Lapoint and set every sign so it stays upright through the seasons.
Augers, lifts, ladders, and mounting tools let us handle everything from small address markers to large business signs.
We'll tell you plainly if a spot hurts visibility or a sign needs a bigger post, before anything goes in the ground.
Spoils from post holes, packaging, and old hardware get cleaned up so the area around your sign looks finished.
Many Lapoint properties sit at the end of long lanes, and a lot of those lanes look alike from the road. A clear entry sign or address marker at the turnoff helps friends, delivery drivers, feed trucks, and emergency crews find you on the first try. That matters most at night or in a snowstorm, when everything blends together.
We install ranch entry signs on posts or overhead frames, address markers at the end of the lane, and directional signs for properties with several drives or buildings. We’ll look at where traffic actually slows down and turns so the sign lands in the right spot, not just the easiest one to dig.
SR-121 runs a 40 mile loop from Vernal through Lapoint, Neola, and Cedarview before reaching Roosevelt. For a business or church along that road, drivers are often moving at highway speed with only a few seconds to read a sign. Height, size, setback, and angle all affect whether someone notices you or drives right past.
We’ll stand where drivers will be and study the sightline before we set anything. Trees, fence lines, and parked equipment can all hide a sign at the wrong angle. Small changes in placement make a big difference in how readable a sign is from the road.
Our crew isn’t a sign shop, so the design and fabrication happen elsewhere. You’ll work with a sign company for the panel, letters, or lighted cabinet. Once it’s ready, we handle the installation. That means setting posts, building mounting frames when needed, and attaching the sign so it stays put.
Bringing us into the conversation before fabrication pays off. If we know the sign’s size and weight before it’s built, we can plan post sizes and footing depth to match, and the sign maker can drill mounting holes in the right places. A little coordination up front saves a lot of improvising on install day.
A sign acts like a sail. Wind pushes on the whole face, and that force lands on the posts at ground level. Posts set too shallow lean over time, especially once frost starts working on them. Uintah County footings go at least 30 inches below grade, and we set sign posts with that in mind so they stay upright through winter.
Before any hole goes in, we call Blue Stakes. If your sign will be lighted, an electrician handles the wiring, and our trenching service can dig and backfill the path for that line so it’s ready when they arrive.
Signs wear out in predictable ways. Strong sun fades colors and cracks plastic faces. Wind loosens bolts until a panel rattles or hangs crooked. Roadside signs near a plowed lane get buried in snow piles, or clipped by the plow itself. Common repairs we take on include:
If a sign keeps getting clipped, moving it a few feet or marking it for the plow driver often solves the problem. Our snow removal crews know to work around signs and markers on the properties we plow.
Winter days are short, and a sign that disappears at 5 p.m. isn’t doing much for half the day. Adding light changes that. A couple of well aimed fixtures on a farm entry or business sign keeps it visible after dark, and our permanent property lighting work pairs well with a new sign installation.
Beyond lighting, a quick check each spring catches loose hardware and leaning posts early. Clearing weeds and brush around the base keeps the sign from getting hidden by summer growth. Call (801) 669-0512 and we’ll take a look at your sign project.
We visit the spot, check sightlines from the road, and confirm the sign's size and weight with you or your sign maker.
Your free quote covers posts, footings, mounting hardware, and any repair work, laid out clearly so there are no surprises.
We call Blue Stakes, set posts at the right depth, and mount your sign level and secure on its frame.
We look at the finished sign from the road with you and tighten up anything that needs a final adjustment.
