On a new build, utilities touch almost every part of the site. Water comes in from one side, power from another, sewer or septic heads out the back, and all of it has to miss the foundation, the driveway, and each other. When nobody plans that ahead, trenches get dug twice and finished ground gets torn up.
Our utility prep work in Jensen puts the dirt side of that puzzle together early. We sit down with your builder and trades, sketch routes, and time the digging around the foundation and driveway. Your trades and utility providers install the actual pipe, wire, and septic system. We call locates, dig to the specs they set, keep the site organized while lines go in, and backfill in compacted layers once everything passes inspection.
We know Jensen building sites often sit back on acreage, and we plan long runs for power and water with that in mind.
Excavators, trenchers, and compaction equipment let us dig septic pits, long service trenches, and tight cuts near the house.
If two lines can share a trench or a shorter route saves time, we will point it out during the planning stage.
Spoils stay organized and away from open trenches, and the site is cleaned up after each phase of utility work.
Utility prep is all the excavation that gets services from where they start to where they are needed. On a typical Jensen build, that means a water service trench, a sewer lateral or a septic tank and drain field excavation, a power trench from the pole or transformer, and sometimes a gas line or conduit for internet. Shops and barns add more runs on top of that. We dig, the trades install, and we backfill. Septic tanks, drain lines, and service lines are always installed by the proper contractor or utility, not by us.
Before any machine moves, we want a simple site sketch. It shows where each utility enters the property, where it connects to the building, and what it needs to avoid along the way. Water and sewer usually need separation. Power may need a certain depth and clearance. Septic fields need open ground away from wells and buildings. Putting those on paper first lets us find routes that share a trench where allowed and stay out of the way of the foundation and future driveway.
If the site still has brush or junk on it, lot clearing should happen first so routes can be staked on clean ground.
A few decisions shape the whole job. We like to settle these during the first visit:
Once those are answered, the trench plan comes together quickly and everyone knows their part.
Jensen is a small farming town of a few hundred people, and many building sites sit back from the road on acreage. That often means a long trench for power or water, crossing pasture, ditches, or an existing lane. Long runs need steady depth and a straight line so they can be found again. We set topsoil to one side and lay it back on top so fields recover. For the digging itself on these runs, our trenching work holds depth and fall from one end to the other.
Utah requires the person digging to call Blue Stakes, so we handle that request. It goes in at least 3 business days before work and no more than 14 calendar days ahead. The marks are good for 21 days, so on a long build with several phases, we may need to renew it as inspections and installers come and go.
Weather matters too. Frozen ground slows digging, and spring melt can turn an open trench into a ditch full of water. We plan utility work for the stretches when ground conditions cooperate whenever the build schedule allows it. When a trench has to sit open through a storm, we pump it out and clean up any sloughed walls before the installer climbs in, so the line still sits on firm, even ground.
Utility trenches cross almost every other part of a project, so order matters. Ideally, lines go in after the foundation is backfilled and before the driveway base is built and the yard gets its final grade. That way, nobody has to dig through finished work. We plan with your builder so driveway prep happens after trenches crossing the drive are backfilled and compacted, keeping soft spots out of the new base.
If you are planning a new home, shop, or addition, call (801) 669-0512 and we will help map out the utility side before the first trench is dug.
We walk the property with your plans, mark entry points for each utility, and note wells, ditches, slopes, and buildings.
Your quote covers each trench, septic excavation, crossings, and backfill so you know exactly what the utility prep includes.
After locates, we dig to spec, coordinate with each installer, and backfill in compacted layers once inspections pass.
We walk the finished routes with you, confirm backfill and cleanup, and note where lines run for your records.
