Raw concrete floors shed a fine gray dust that ends up on tools, shelves, and everything you carry out the door. They also soak up spills and get harder to clean every year. Polishing fixes that by working with the slab you already have instead of covering it up with a coating that can wear through.
We grind the surface with a series of diamond tools, starting coarse and moving finer, then apply a densifier that hardens the top layer. Each pass after that tightens the surface until it reflects light and sheds dirt. For Fort Duchesne shops, garages, and commercial spaces, concrete polishing delivers a floor with no coating to peel, very little upkeep, and a clean look that brightens the whole room.
We understand how Fort Duchesne shops and garages get used, from muddy work trucks to winter slush, and plan floors around that.
Diamond grinders, densifiers, and dust collection equipment let us polish your floor properly while keeping fine dust out of the air.
If your slab isn't a good fit for polishing, we'll tell you why and talk through finishes that would work better.
We contain grinding dust, protect walls and fixtures, and leave the space swept and ready to move back into.
Polishing works best on interior concrete that’s already in decent shape and gets steady use. Think shop floors, garages, storage buildings, offices, and retail spaces. Fort Duchesne sits right on US-40, about 10 minutes from Roosevelt, and plenty of work trucks, trailers, and equipment around here end up parked on bare slabs that never got a finish.
Those floors are good candidates. Polishing doesn’t add a layer that can chip or peel under heavy tires. It hardens and refines the concrete itself, so the floor keeps working like concrete, only cleaner, brighter, and much less dusty.
The process starts with coarse diamond tooling that removes stains, old glue, and the weak top skin of the slab. From there we step up through finer grits, and each pass smooths out the scratches left by the one before it. Skipping steps leaves swirl marks that show up the moment light hits the floor.
About halfway through the grits, a liquid densifier goes down. It soaks in and reacts with the concrete to harden the surface, which is a big part of why polished floors resist wear and stop dusting. The final passes bring up the shine, and a guard coat can be added at the end for extra stain resistance.
You get to decide how much shine you want. A low sheen has a soft, satin look that hides scuffs and works well in shops. A medium sheen reflects more light and looks great in garages and showrooms. A high gloss gives a mirror look that suits offices and retail space but shows dust a bit more.
You can also choose how deep we grind. A light grind keeps the smooth cream finish, while a deeper grind exposes some of the sand or stone in the mix. If you’d like color too, concrete staining and dye options can go on during the polishing steps for a custom look.
Polishing shows off whatever is in the slab, good or bad. Cracks, chips, and old patches don’t disappear when the floor gets shiny. They often stand out more. That’s why we look over the whole floor before grinding and decide what needs attention.
Cracks get filled with a material that grinds and polishes along with the concrete, and chipped joint edges get rebuilt. If the slab has bigger problems like spalling or sunken sections, a round of concrete repair for damaged slabs comes first. A floor with deep structural issues may not be a good fit, and we’ll tell you that before you spend anything.
Polishing isn’t the only way to finish an indoor slab. Epoxy puts a thick coating over the concrete that resists chemicals and comes in lots of colors and flake blends. It’s a strong pick for shops dealing with oil, fuel, and harsh cleaners, though a coating can scratch and will eventually need recoating.
If you’re torn between the two, take a look at epoxy coating for garages and shops and compare. In short, polishing has less upkeep and nothing to peel, while epoxy offers more color and chemical protection. Stain on its own adds color but doesn’t harden the floor the way polishing does. We’ll help you weigh them for your space.
A polished floor is about as low maintenance as flooring gets, but a few habits keep it looking its best, especially in winter when boots and tires track in grit, sand, and slush from outside.
Treat it right and a polished floor keeps its sheen for years with nothing more than regular cleaning.
We look over the slab, check for cracks and coatings, and talk about the sheen and look you want for the space.
Your free quote covers grinding stages, repairs, densifier, guard coat, and the finish level we agreed on during the visit.
We repair damage, grind and hone through each diamond stage, harden the slab, and polish it to your chosen sheen.
We walk the finished floor with you and go over cleaning, mats, and when you can bring equipment back in.
