Trenching in Dinosaur

Running a new line somewhere on your Dinosaur lot? Basin Sealcoat & Striping digs trenching for water, sewer, gas, power, and conduit runs to homes, shops, and outbuildings. Your installer lays the line, and we open a straight trench at the depth they ask for, then backfill in compacted layers after inspection so the route doesn’t sink later.

Request A Quote

Clean Trenches That Make Install Day Easy

In a town of about 243 people, most trenching jobs are personal: a new water service for a house on Brontosaurus Boulevard, a power feed out to a backyard shop, or an old sewer line that finally needs replacing. Each one has to come out straight, at the right depth, and without tearing up more of the yard than necessary.

We handle trenching in Dinosaur for homeowners, small businesses, and contractors who need the ground opened and closed correctly. We request Colorado 811 marks, confirm depth and bedding with your installer, and keep spoils on one side so the trench stays workable. After the line passes inspection, we backfill in thin lifts, compact each one, and leave the surface level and tidy.

What Comes Standard on Dinosaur Trenching Jobs

Why Dinosaur Homeowners Trust Basin With Trenching

A straight, well backfilled trench keeps install day simple and your yard flat for years after.

Local Know How

We understand how older Dinosaur yards can hide abandoned pipe and forgotten lines, so we dig carefully and ask questions first.

Right Equipment

We bring a trencher or compact excavator sized for your run, which keeps long lines moving and tight yards protected.

Honest Advice

If a shorter or easier route would save you money or spare a tree, we'll tell you before the first cut.

Clean Job Sites

Spoils stay on one side, open trenches stay flagged, and the strip gets raked smooth once the backfill is done.

Trenching in Dinosaur for Service Lines, Shops, and Yards

Trenching Calls We Get From Dinosaur Homes and Businesses

Most trenching in Dinosaur comes down to getting something from point A to point B underground. A new water or sewer service for a house. Power to a detached garage or shop. Gas to a heater or appliance out back. Conduit for yard lights, a gate, or a sign in front of a business that serves travelers on US-40. Sprinkler mains when a yard gets redone. Even a short run to a mailbox light or a hydrant by the garden counts.

Whatever is going in, the job is about the same: a trench that runs where it should, holds the depth the line needs, and gets closed up without leaving a scar across the property.

Who Lays the Pipe When Basin Handles Trenching

We keep the roles simple. Basin digs the trench and backfills it. Your plumber, electrician, gas company, or septic installer puts the line in, makes the connections, and handles the inspection. That way each trade is responsible for the part they know, and nobody is guessing about who did what.

Before we dig, we check with your installer on width, depth, bedding material, and any fall a sewer line needs. If your project has several services going to one building, planning all the service routes together with utility prep usually saves a second round of digging.

How Trenching Depth Gets Decided

We don’t pick the depth. It comes from the type of line, your installer, and the plans or code requirements they’re working from. A water line, a power conduit, and a gas line can all call for different depths, and sewer lines need a steady slope from start to finish. Our job is to hit those numbers and hold them along the whole run.

Colorado 811 comes first. Since we’re the ones digging, we place the request at least two full business days ahead, not counting the day of the call, and we slow down and hand dig near anything that’s been marked.

Trenching Through Older Dinosaur Yards

Plenty of homes in Dinosaur date back decades, and their yards can hold surprises: old pipe abandoned in place, a buried clothesline footing, or a forgotten feed to an outbuilding that’s long gone. Private lines like these never get marked by the utility companies, so we ask you to point out anything you know about before we start.

When a route has to cross a patio, sidewalk, or worn out driveway, we’ll talk through whether it makes sense to go around or cut through. If cutting is the better call, removing that section of concrete or asphalt clears the way so the trench can run straight.

Getting Ready for a Trenching Crew

A little prep on your end makes trench day go faster. Here’s what helps:

  • Mark any private lines, sprinkler heads, or septic parts you know about
  • Move vehicles, trailers, and stored items away from the route
  • Confirm the start and end points with your installer
  • Keep pets and kids clear of the work area
  • Let neighbors know if the route runs near a shared fence

We’ll handle the rest, including flagging the open trench while it waits for the installer.

Backfilling a Trenching Job the Right Way

Backfill decides whether you’ll notice the trench next spring. Dirt pushed back in all at once settles, leaving a sunken line through the lawn or a soft rut in a gravel drive. We place bedding around the pipe when your installer calls for it, then fill in thin lifts and compact each one, keeping rocks away from the line. On gravel drives, the top few inches get capped with matching material so tires don’t find a soft strip.

Topsoil or gravel goes back on top to match what was there. If the trench clipped a sprinkler line, we’ll show you where, and repairs to your irrigation system can get the yard watering again. Call (801) 669-0512 to set up a route walk in Dinosaur.

Dinosaur Trenching, Step by Step

Here’s how a typical trenching project runs from your first call to the final pass.

Site Visit

We walk the route with you, mark start and end points, and check depth and bedding needs with your installer.

Free Quote

Your written quote spells out trench length, depth, any crossings, and how we'll backfill, so you know what's included.

Quality Work

Once Colorado 811 marks are in, we dig a straight trench with a smooth bottom and keep it flagged for the installer.

Final Walkthrough

After the line passes inspection, we backfill in compacted lifts and walk the finished route with you before heading out.

Dinosaur Trenching Questions, Answered Plainly

These are the trenching questions Dinosaur property owners bring up most.
Will Basin install the pipe or wire in the trench?
No. Your plumber, electrician, or utility company installs the line and makes the connections. We dig the trench, keep it safe while they work, and backfill after inspection.
Only as long as your installer and inspector need it. Trips out to Dinosaur are scheduled ahead, so we coordinate with them to cover the trench soon after the line is approved.
Yes. We peel back sod or topsoil along the route, keep the strip narrow, and put it back on top after backfill. The lawn may need some water and time to knit back together.
We stop and look at it before going further. If it’s live, we work around it, and if it’s abandoned, we’ll talk with you and your installer about whether to pull it out.
No. Since we’re doing the digging, we place the Colorado 811 request. Just tell us about any private lines on your property, since those don’t get marked.
Not when it’s backfilled in thin, compacted lifts. That’s how we close every trench, and it keeps the ground from settling through freeze and thaw.
Absolutely. Call (801) 669-0512 and we’ll walk your Dinosaur trench route and send you a written quote for free.

Got a Line to Run in Dinosaur? Let's Talk Trenching

Call with your installer’s details and we’ll set a date to walk the route and plan the dig.